Sanyo PM-8200 manual Setting the FlashFunction, Setting the Self-timer

Setting the FlashFunction

To activate the flash function:

1.With the phone open and in camera mode, press Options (right softkey).

2.Select Flash and press .

3.Select an option from the following and press .

On This Shot to activate the flash for one shot.

On Always to activate the flash all the time.

Auto to activate the flash automatically.

4.Take a picture using the phone’s main LCD as a viewfinder.

To deactivate this feature, select Off during step 3.

Tip: When the phone is open and in camera mode, press to switch between flash modes.

Setting the Self-timer

To activate the Self-timer:

1.With the phone open and in camera mode, press Options (right softkey).

2.Highlight Self-timerand press .

3.Highlight the length of delay you want the timer to use (10 seconds or 5 seconds) and press .

4.Press Start (left softkey) when you are ready to start the timer. ( appears on the lower left portion of the main LCD during the Self-timer countdown.)

5.Get ready for the picture. (When the timer is down to three seconds, the Self-timer icon will turn red and the phone will begin to beep.)

Note: After taking a picture, Self-timer settings return to their default settings.

To cancel the Self-timer after it has started:

Press Cancel (right softkey).

Note: While the Self-timer is active, all keys are disabled except , , and Cancel (right softkey).

Section 2K: Using Your Phone’s Built-in Camera 156