Sanyo PM-8200 manual Receiving a PCS Ready Link Call 1-to-1 Call, Using PCS Ready Link 139

Receiving a PCS Ready Link Call (1-to-1 Call)

1.Make sure your phone’s PCS Ready Link mode is enabled (see “Setting PCS Ready Link Mode” on page 133).

2.When you receive a PCS Ready Link call from a contact, “R-Link Call,” the contact’s name, and the PCS Ready Link number appear on the display. (You do not need to take any action to answer the call.)

3.If the person placing the call has kept the floor (held the Ready Link [Memo] button), you will see the contact name and PCS Ready Link number along with “has floor.”, and you will hear the caller speaking.

4.When the caller finishes speaking and releases the Ready Link (Memo) button, you will see “Floor is open.” on the display

screen. Press and hold to take the floor and reply to the caller. (You will see “You have floor.” and hear a tone confirming that you may speak.)

5.When the conversation is finished, press .

Receiving a PCS Ready Link Call (Group Call)

1.When you receive a PCS Ready Link call from one of the group members, “Group Call,” the group member’s name, and the PCS Ready Link number appear on the display.

2.Continue with the PCS Ready Link call as described previously.

3.When the conversation is finished, press .

Section 2J: Using PCS Ready Link 139