Displaying the Contacts List
Press the navigation key right.
– or –
1. Press to access the main menu.
2. Select Contactsand press .
3. Select Find/Add Entryand press .
Addinga New Contacts Entry
Your PCS Vision Phone can store up to 500 phone numbers in up to
300 Contacts entries (an entry may contain up to seven numbers).
Each entry’s name can contain sixteen characters.
To add a new entry:
1. Press to access the main menu.
2. Select Contactsand press .
3. Select Find/Add Entryand press .
Press the navigation key right for the shortcut (steps 1
through 3).
4. Highlight <Add Contact>and press .
5. Enter a name and press .
6. Select a label by using your navigation key and press .
7. Enter the phone number or address and press .
8. Press Save(left softkey).
– or –
1. Press the navigation key right to display the Contacts list.
2. Highlight an entry and press Options(right softkey).
3. Highlight Add New Contactand press .
4. Follow steps 5-8 above.
After you have saved the number,the new Contacts entry is
displayed.(See “Contacts List Entry Options”on page 92.)
Tip:You can also add a new Contacts entry by entering a number from standby
mode. See “Saving a Phone Number” on page 27.
Section 2G: Using the Contacts Directory 89