Sanyo PM-8200 Using Caller ID, Responding to Call Waiting, To switch back to the first caller

Using Caller ID

Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you place a call, just follow these easy steps.

To block your phone number from being displayed for a specific outgoing call:

1.Press .

2.Enter the number you want to call.

3.Press .

To permanently block your number, call PCS Customer Solutions.

Responding to Call Waiting

When you’re on a call, Call Waiting alerts you of incoming calls by sounding two beeps. Your phone’s screen informs you that another call is coming in and displays the caller’s phone number (if it is available and you are in digital mode).

To respond to an incoming call while you’re on a call:

Press (or press Options [right softkey], highlight Flash, and press ). (This puts the first caller on hold and answers the second call.)

To switch back to the first caller:

Press again (or press Options [right softkey], highlight Flash, and press ).

Tip: For those calls where you don’t want to be interrupted, you can temporarily

disable Call Waiting by pressing before placing your call. Call Waiting is automatically reactivated once you end the call.

Section 3A: PCS Service Features – The Basics 183