Sanyo PM-8200 Making a CallWith PCS Voice Command, Accessing Information Using PCS Voice Command

Making a CallWith PCS Voice Command

To place a call with PCS Voice Command:

1.Press and create your address book once you’ve signed up for PCS Voice Command. (You’ll hear a tone followed by the prompt “Ready.”)

2.After the “Ready” prompt, simply say, in a natural voice, “Call” and the name of the person or the number you’d

like to call. (For example, you can say, “Call Jane Smith at work,” “Call John Baker on the mobile phone,” “Call 555-1234,” or “Call Bob Miller.”)

3.Your request will be repeated and you will be asked to verify. Say “Yes” to call the number or person. (The number will automatically be dialed.) Say “No” if you wish to cancel.

Tip: Keep in mind that PCS Voice Command recognizes not only your voice, but any voice, so that others can experience the same convenience if they use your phone.

For more helpful hints on PCS Voice Command, including a list of recognized commands and an interactive tutorial, visit

www.talk.sprintpcs.com.

Accessing Information Using

PCS Voice Command

To access information using PCS Voice Command:

1.Press .

2.Say “Call the Web.” (To access, listen to and respond to email, once email has been set up, say “Call My Email.”)

3.Choose from a listing of information categories like news, weather, sports, and more.

Note: PCS Voice Command is not available while roaming off the Sprint Nationwide PCS Network.

Section 3C: PCS Voice Command 225