Redialing a PCS Ready Link Call

You can redial to the last PCS Ready Link call that you dialed or received (whichever was more recent).

To redial a PCS Ready Link call:

1.From the PCS Ready Link List, highlight Redial, and press and

hold .

You will see R-Link redialing... and Connecting... followed by the text “You have floor.

2.Speak after the beep (keep pressing down while you are speaking). After speaking, release the button to allow others to reply.

3.When you are finished, press .

Note: You can change the volume and the speaker setting while a PCS Ready

Link call is activated. Volume: Adjust the voice volume by using the Side Volume key or by pressing the navigation key up or down except when you are pressing

and holding . Speaker: Switch the speaker on or off by pressing .

PCS Ready Link Options

When you use PCS Ready Link, several user options are available by pressing Options (right softkey). To select an option, highlight it and press .

Copy to copy a contact to the Personal List. Copy Group appears when you highlight a group. (This option doesn’t appear if the entry is already in the Personal List or when you select Personal List/Personal Groups.)

Edit to edit a PCS Ready Link number and/or name. See page 145.

Erase to erase a contact. Erase Group appears when you highlight a group.

Add Contact to add a new contact. Add Group appears when you highlight a group list. See page 143 for details.

Erase R-Link List to erase entries saved in the PCS Ready Link List (except Company List/Company Groups).

Help to see the PCS Ready Link instruction page.

Note: When you use additional accessories, the volume of Ready Link floor tones

is fixed as follows. Speaker/Car Kit: Level 3. Earpiece/Headset: Level 2.

Section 2J: Using PCS Ready Link

140

Page 152
Image 152
Sanyo PM-8200 manual Redialing a PCS Ready Link Call, PCS Ready Link Options, To redial a PCS Ready Link call