PreparingYour Phone for PCS Ready Link Service

The first time you use your PCS Vision Ready Link Phone, your phone must identify itself and make itself available to the Ready Link network.

1.When you activate PCS Ready Link for the first time, you will be prompted to activate Ready Link service. Press OK (left softkey) to activate. (You will see “Preparing Ready Link service... Please wait.”)

2.Press R-Link(left softkey) or the Ready Link (Memo) button on the side of your phone (). (The PCS Ready Link Help message will appear.)

3.Press Yes (left softkey) to read a brief introduction to PCS Ready Link, and press Next (left softkey) to continue through the tutorial.

Your phone is now ready to make and receive PCS Ready Link calls.

Ready Link Call Alerts

There are several ways your PCS Phone alerts you during PCS Ready Link calls.

When you make or receive a PCS Ready Link call:

The phone sounds (depending on the Ringer Type and Ringer Volume setting).

The backlight illuminates.

The screen displays a PCS Ready Link call message.

The other party’s PCS Ready Link number and name (if available) are displayed.

The screen displays who has the floor.

The status of a PCS Ready Link call:

The Green LED On indicates you have the floor and may speak.

The Red LED On indicates another contact has the floor.

The LED Off indicates the floor is open. (You can take the floor

and speak by pressing and holding .)

Section 2J: Using PCS Ready Link

134

Page 146
Image 146
Sanyo PM-8200 manual PreparingYour Phone for PCS Ready Link Service, Ready Link Call Alerts, Using PCS Ready Link 134