IBM SG24-6320-00 manual WebSphere Commerce Payments instance management, Stopping the instance

Draft Document for Review July 28, 2004 7:33 pm 6320ax04.fm

ADMU0111E: Program exiting with error:

com.ibm.websphere.management.exception.AdminException: ADMU3027E: An

instance of the server may already be running: WC_<instancename>

Stopping the instance

Run the following command from the <was_home>\bin directory:

stopServer WC_<instancename>

Where <instancename> is the name of the instance. When the instance is stopped, the last message from the serverstatus command should be:

ADMU3201I: Server stop request issued. Waiting for stop status.

ADMU4000I: Server WC_<instancename> stop completed.

If the instance is not running, the last message will be:

ADMU0509I: The Application Server "WC_<instancename>" cannot be reached. It appears to be stopped.

WebSphere Commerce Payments instance management

This section describes how to start and stop, as well as how to check the status, of the WebSphere Commerce Payments instance.

Note: The parameters to the serverStatus, startServer and stopServer scripts are case sensitive.

Checking instance status

Run the following command from the <was_home>\bin directory:

serverStatus <instancename>_Commerce_Payments_Server

Where <instancename> is the name of the instance. If the instance is running, the last message from the serverstatus command will be:

ADM0508I: The Application Server “<instancename>_Commerce_Payments_Server” is STARTED

If the instance is not running, the last message will be:

ADMU0509I: The Application Server

"<instancename>_Commerce_Payments_Server>" cannot be reached. It appears to be stopped.

Appendix A. Managing WebSphere Commerce components 241