IBM T200F manual Standard Inquiry Data Valid LUN, AENC0, NACA0

Standard Inquiry Data Valid LUN

Table 4. Standard Inquiry Data Valid LUN

	7	6	5	4	3	2	1	0
0	Peripheral Qualifier (000b)				Peripheral Device Type (01h)
1	RMB(1)			Device-type modifier (0)
2	ISO version (0)		ECMA version (0)				Version (3)
3	AENC(0)	Obsolete	NACA(0)	HiSup(0)	Response Data Format (2)
4				Additional length (33)
5				Reserved
6	BQue(0)	EncSrv(0)	VS(0)	MultiP(0)	MCh-	Obsolete	Adr32(0)	Adr16
					ngr(0)
7	RelAdr(0)	Obsolete	WBs16	Sync	Linked(0)	Trans-	CmdQ(0)	VS(0)
						Dis(0)
8				Vendor Identification
15
16				Product Identification
31
32			Product Revision Level: YMDV
35
36				Reserved				AutDis
37				Reserved

Values for the Adr16 bit are 1 (for SCSI) or 0 (for Fibre Channel).

Values for the WBs16 bit are 1 (for SCSI) or 0 (for Fibre Channel).

Values for the Sync bit are 1 (for SCSI) or 0 (for Fibre Channel).

The AutDis or Automation Disabled bit indicates that this drive is not capable of full automation function.

The Standard Inquiry Data is based on the SCSI-3 standard for Standard Inquiry Data.

The Vendor Identification returns IBM in ASCII with trailing blanks.

The Product Identification returns ULT3580-TD1in ASCII with trailing blanks. TD stands for tape drive and 1 stands for Generation 1 of this product family.

The Product Revision Level has four values: Y represents year, M represents month,

Drepresents day, and V is a suffix. For V, values of 0 through 9 and A through Z are valid; a value of 0 is designated as earliest or least significant, and Z is designated as most significant.

8Ultrium Internal Tape Drive and 3580 Ultrium Tape Drive: SCSI Reference