IBM T200F manual Sequential Access Device Log Parameters, Parameter Description Length

Sequential Access Device Log

The Sequential Access Device Log Page is 0Ch.

Table 21. Sequential Access Device Log Parameters

Parameter	Description	Length	DU	LP	LBIN
0h	Write Data Bytes	8	0	0	0
	Received, before
	compression
1h	Write Data Bytes	8	0	0	0
	Received, after
	compression
2h	Read Data Bytes Sent,	8	0	0	0
	before compression
3h	Read Data Bytes Sent,	8	0	0	0
	after compression
0100h	Cleaning Required	8	0	0	0
8000h	Megabytes processed	4	0	0	0
	since last cleaning
8001h	Lifetime load cycles	4	0	0	0
8002h	Lifetime cleaning cycles	4	0	0	0

A non-zero value of the Cleaning Required parameter indicates that a condition requiring cleaning has been detected and a subsequent cleaning cycle has not been completed. The Cleaning Required parameter is persistent across hard resets and power cycles.

22Ultrium Internal Tape Drive and 3580 Ultrium Tape Drive: SCSI Reference