IBM T200F manual Write Attribute

WRITE ATTRIBUTE
	Table 105. WRITE ATTRIBUTE Command
		7	6	5		4		3	2	1	0
	0				Operation Code (8Dh)
	1
	:					Reserved
	4
	5					Volume Number (0)
	6					Reserved
	7					Partition Number (0)
	8
	:					Reserved
	9
	10
	:					Allocation Length
	13
	14					Reserved
	15						Control
Until the SCSI Primary Commands-3(SPC-3)is published, refer to SCSI proposal
T10/99-148r7 for support for the WRITE ATTRIBUTE command.
For information about attributes that are supported, see “READ ATTRIBUTE” on
page 43.
Table 106 gives the format of the data that is returned for an Attribute Values
service action request.
	Table 106. Parameter Data for Attribute Values Service Action Request
		7	6	5		4		3	2	1	0
	0
	:				Parameter Data Length (n-3)
	3
	4
	:					Attribute #1
	x
	m
	:					Attribute #y
	n

84Ultrium Internal Tape Drive and 3580 Ultrium Tape Drive: SCSI Reference