Insignia NS-32D510NA15 manual Select the audio out mode, Headphones/Audio Out -You can use

Insignia 32" LED TV

• Digital Audio/SPDIF—Sends digital audio to		Select the audio out mode
an external audio system. You can select:		If your TV is on when you connect a device to the
• RAW (to pass through the original digital
		/AUDIO OUT jack on the side of your TV, a screen
audio sound).
		opens where you select which audio out mode you
• PCM (to output audio in 2-channel stereo).
		want to use.
• Digital Audio Delay—Fine tunes the audio		1 Connect headphones, a home theater system,
when it is not in sync with the video.		sound bar, or external speaker system to the
• MTS/SAP—(Analog channels only) Selects the		/AUDIO OUT jack on the side of your TV. The
audio mode. You can select:		following screen opens.
• Mono—Select this option if there is noise
or static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
	Note
	You can also press MTS/SAP one
	or more times to select the
	audio mode.
• Audio Language Default—(Digital channels
only) Selects an alternate audio language, if
available.		2 Press W or X to highlight the audio out mode
• Headphones/Audio Out—You can use the
		you want to use, then press ENTER. You can
/AUDIO OUT jack on the side of your TV to		select:
connect headphones, a home theater system,		• Audio Out Fixed—Select this option to use
sound bar, or external speaker system. When a
		the remote control that came with the home
device is connected to the /AUDIO OUT
		theater system, sound bar, or external speaker
jack, the TV speakers are muted. You can
		system you connected to the /AUDIO OUT
select:
		jack to control the audio.
• Headphones/Audio Out
Variable—Select this option to use the
remote control that came with your TV to
control the audio from headphones, a
home theater system, a sound bar, or an
external speaker system you connected to
the /AUDIO OUT jack.
• Audio Out Fixed—Select this option to
use the remote control that came with the
home theater system, sound bar, or
external speaker system you connected to
the /AUDIO OUT jack to control the
audio.
• Reset Audio Settings—Reset all audio
settings to factory defaults.
4 Press W or X to adjust the option, or press S or
T to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.

54 www.insigniaproducts.com