Turn on your TV for the first time
The first time you turn on your TV, the TV SETUP wizard opens. The wizard guides you through setting up basic settings including the menu language, time setting, picture mode, TV signal source, and the channel list.
1Make sure that you have:
•Installed the remote control batteries. (See page 36 for details.)
•Connected an antenna, cable TV, or satellite TV. (See page 13 through 18 for details.)
•Connected the power cord. (See page 35 for details.)
2Press 
(power) to turn on your TV. The Choose your Menu Language screen opens.
3Press S or T to highlight the language you want, then press ENTER. The time setting screen opens.
4Press S or T to highlight Mode, then press X to access the setting.
5Press S or T to select Manual (to set the date and time manually) or Auto (to set the date and time automatically from a TV signal source based on the time zone you select), then press ENTER, MENU, or W.
Note
If you select Auto, the displayed time will be incorrect until your TV gets the correct time from a TV signal source.
6Press S or T to highlight Time Zone, then press X to access the setting.
7Press S or T to select your time zone. You can select Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Atlantic, or Newfoundland, then press ENTER, MENU, or W.
8Press S or T to highlight Daylight Saving, then press X to access the setting.
9Press S or T to select On (if your viewing area observes Daylight Saving Time) or Off (if your viewing area does not observe Daylight Saving Time), then press ENTER, MENU, or W.
10If you selected Manual for Mode:
•Press S or T to highlight Year, Month, or Day, then press X to access the setting. Press S or T to adjust the setting, then press ENTER.
•Press S or T to highlight Time, then press X to access the setting. Press W or X to highlight the hour, minute, or AM/PM field, then press S or T to adjust the setting. When you are finished, press ENTER.
11When you have finished setting the time, press ENTER. The What is your viewing environment screen opens.
12Press S or T to highlight Home Use Mode or Store Display Mode, then press ENTER.
If you selected Store Display Mode, a message asks if you are sure you want this mode. Select Yes to continue using Store Display Mode, or select No to change your selection, then press ENTER. Store Display Mode is not an energy savings mode and will display a retail banner.
The Choose your TV Source screen opens.
www.insigniaproducts.com | 37 |
