Insignia NS-32D510NA15 manual General

Insignia 32" LED TV

Problem

Trouble programming your existing universal remote control.

Solution

•See instructions and a table of common codes in “Program universal remote controls” on page 80.

•Codes are subject to change. For

up-to-date codes, go to

www.insigniaproducts.com/remotecodes

•Replace dead batteries with new batteries. See “Install remote control batteries” on page 36.

•Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist.

Problem	Solution
When I press	• Turn on the device. Your TV
INPUT, I cannot
	automatically detects and
select my
	displays which video jacks have
device (it is
	devices connected to them
grayed out).
	when the devices are turned on.
	• Turn off Auto Input Sensing. See
	“Turn Input Sensor on or off” on
	page 68.
One or more	• Make sure that the channels are
channels do not
	not blocked. See “Set parental
display.
	control levels” on page 61.
	• Make sure that the channels are
	not hidden. The channel may
	have been deleted from the
	channel list. You can tune to the

General

Problem	Solution
No power.	• Make sure that the power cord
	is correctly connected to your
	TV and a power outlet.
	• Unplug the power cord, wait 60
	seconds, then plug the cord
	back in and turn on your TV.
	• Other devices (for example, a
	surround sound receiver,
	external speakers, fans, or hair
	dryers) may be interfering with
	your TV. Try turning off one
	device at a time to determine
	which device is causing
	interference. After you have
	determined which device is
	causing interference, move it
	further from the TV to eliminate
	the interference.
“No signal”	• Press INPUT and make sure that
error message is
	you have selected the correct
displayed.
	input for the device or service
	you are trying to use.
	• If you are using a cable or
	satellite box, use the remote
	that came with that box to
	change channels.
	• Make sure that you have the
	correct input selected to view
	channels from the cable or
	satellite box.
After Auto	• Reception can vary by channel
Channel Search,
	depending on the broadcast
there are no
	power level of a given station.
channels.
	Contact your cable or satellite
	TV provider.
	• Make sure that the antenna or
	cable/satellite TV is connected
	securely to your TV.
	• Try replacing the cable between
	the antenna/cable or
	cable/satellite box and your TV.

	channel by pressing the
	number buttons or you can add
	the channel back to the channel
	list. See “Hide channels” on
	page 57.
	• If you are using a cable or
	satellite box, use the remote
	that came with that box to
	change channels.
	• Make sure that you have the
	correct input selected to view
	channels from the cable or
	satellite box.
	• If you are using an antenna, the
	digital channel signal may be
	low. To check the digital
	channel signal strength, see
	“Check the digital signal
	strength” on page 58.
Password is lost.	• Enter 9999 to access parental
	controls, then set a new
	password. See “Set or change
	the password” on page 59.
Some settings	• If a setting is grayed, the setting
cannot be
	is not available in the current
accessed.
	video input mode (for example
	TV mode). Change to a different
	video input source. See “Select
	the video input source” on
	page 39.
TV cabinet	• When the TV is in use, the
creaks.
	temperature rises naturally and
	may cause the cabinet to
	expand or contract which can
	cause a creaking noise. This is
	not a malfunction.
Control buttons	• Make sure that the Button Lock
do not work.
	option is set to Off. See “Lock
	control buttons” on page 60.
	• Unplug the power cord, wait a
	few seconds, then plug the cord
	back in and turn on your TV.
TV keeps	• Make sure that the sleep timer
turning off.
	is not turned on. See “Set the
	sleep timer” on page 67.

74 www.insigniaproducts.com