Integra DTR-5.9 Controlling Other Components—Continued, Resetting the Remote Controller

Controlling Other Components—Continued

Remote Control Codes for Integra/Onkyo Components Connected via

Integra/Onkyo components that are connected via are controlled by pointing the remote controller at the AV receiver, not the component. This allows you to con- trol components that are out of view, in a rack, for exam- ple.

1	Make sure the Integra/Onkyo component
	is connected with an	cable and an
	analog audio cable (RCA).
	See page 37 for details.
2	Enter the appropriate remote control code
	to the Remote Mode button.

•[DVD] Remote Mode button

31612: Integra/Onkyo DVD player with

•[CD] Remote Mode button

71327: Integra/Onkyo CD player with

•[Tape] Remote Mode button

42157: Onkyo cassette recorder with (default)

See the previous page for how to enter remote control codes.

3 Press the Remote Mode button, point the remote controller at the AV receiver, and operate the component.

If you want to control an Integra/Onkyo component by pointing the remote controller directly at it, or you want to control an Integra/Onkyo component that’s not con-

nected via , use the following remote control codes:

•[DVD] Remote Mode button

30627: Integra/Onkyo DVD player without (default)

•[CD] Remote Mode button

71817: Integra/Onkyo CD player without (default)

Note:

•If you connect an -capable Onkyo MiniDisc recorder, CD recorder, or RI Dock to the TAPE IN/OUT jacks, or connect an RI Dock to the

GAME/TV jacks, for to work properly, you must set the Input Display accordingly (see page 46).

Resetting the Remote Mode Buttons

You can reset a Remote Mode button to its default remote control code.

1	While holding down the Remote
	Mode button that you want to
	reset, press and hold down the
	[Audio] button until the Remote
	indicator lights up (about 3 sec-
	onds).

(3 seconds)

2	Within 30 seconds, press the
	Remote Mode button again.
	The Remote indicator flashes twice,
	indicating that the button has been
	reset.
	Each of the Remote Mode buttons is
	preprogrammed with a remote control
	code. When a button is reset, its prepro-
	grammed code is restored.

Resetting the Remote Controller

You can reset the remote controller to its default settings.

1	While holding down the
	[Receiver] Remote Mode button,
	press and hold down the [Audio]
	button until the Remote indicator
	lights up (about 3 seconds).

(3 seconds)

2	Within 30 seconds, press the
	[Receiver] Remote Mode button
	again.
	The Remote indicator flashes twice,
	indicating that the remote controller
	has been reset.

101