Advanced
Equalizer Settings
These settings are set automatically by the Automatic Speaker Setup function (see page 39).
Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 85.
1 | Press the [Receiver] Remote |
| |
| Mode button, followed by the |
| [Setup] button. |
The main menu appears onscreen.
If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.
2 Use the Up and Down []/[ ] buttons to select “2. Speaker Setup,” and then press the [Enter] button.
3 | Use the Up and Down [ ]/[ ] |
| buttons to select “5. Equalizer |
Settings,” and then press [Enter].
5
6
7
Press the Down [ | ] button, and | |||||
then use the Left and Right | ||||||
[ ]/[ ] buttons to select a | ||||||
speaker. |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| Equalizer |
| Manual |
|
| |
| Channel |
| Front |
|
|
|
| 63Hz |
| 0dB |
|
| |
| 250Hz |
| 0dB |
|
| |
| 1000Hz |
| 0dB |
|
| |
| 4000Hz |
| 0dB |
|
| |
| 16000Hz |
| 0dB |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use the Up and Down []/[ ] buttons to select a frequency. Use the Left and Right []/[ ] buttons to adjust the level at that frequency.
The volume at each frequency can be adjusted from
Tip: Low frequencies (e.g., 63Hz) affect bass sounds; high frequencies (e.g., 16000Hz) affect treble sounds.
Use the Up [] button to select “Channel,” and then use the Left and Right []/[ ] buttons to select another speaker.
Repeat steps 5 and 6 for each speaker. Speakers that you’ve set to No or None in the Speaker Configuration (page 82) cannot be selected.
4 | Use the Left and Right [ ]/[ ] |
| buttons to select: |
Off: Tone off, response flat. Audyssey: The tone for each speaker
is set automatically by the Automatic Speaker Setup function. Be sure to select this setting after having performed the Automatic Speaker Setup.
Manual: You can adjust the equal- izer for each speaker manually.
If you selected Manual, continue with this procedure. If you selected Off or Audyssey, go to step 8.
8 | Press the [Setup] button. |
| |
| The setup menu closes. |
Notes:
•The front, center, surround, and surround back speak- ers can be adjusted at 63Hz, 250Hz, 1000Hz, 4000Hz, and 16000Hz. The subwoofer can be adjusted at 25Hz, 40Hz, 63Hz, 100Hz, and 160Hz.
•While the Direct listening mode is selected, the equal- izer settings have no effect.
•This procedure can also be performed on the AV receiver by using its [Setup], [Enter], and arrow but- tons.
86