![Zone 2—Continued](/images/new-backgrounds/13070/13070187x1.webp)
Zone 2—Continued
Powered Zone 2 Setting |
| 3 | Use the Up and Down [ ]/[ ] |
If you’ve connected your Zone 2 speakers to the AV |
|
| buttons to select “2. Zone2,” and |
|
|
|
receiver, as explained in “Connecting Your Zone 2 | then press [Enter]. |
| |
Speakers Directly to the AV receiver” on page 93, you |
|
must set the Powered Zone 2 setting to Act (Activated). |
|
Receiver
Enter
Setup
1 | Press the [Receiver] Remote |
| |
| Mode button, followed by the |
| [Setup] button. |
The main menu appears onscreen.
If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “7. Hardware- |
Setup,” and then press [Enter].
4 | Use the Left and Right [ ]/[ ] | |
| buttons to select: |
|
|
| |
| Powered Zone2 | Not Act |
| Zone2 | Fixed |
NotAct: ZONE 2 SPEAKERS L/R speaker terminals not acti- vated (Powered Zone 2 dis- abled).
Act: ZONE 2 SPEAKERS L/R speaker terminals activated (Powered Zone 2 enabled).
5 | Press the [Setup] button. |
| |
| Setup closes. |
Notes:
•When Act is selected and Zone 2 turned on, the Zone 2 speakers connected to the ZONE 2 L/R speaker termi- nals output sound, but the surround back speakers con- nected to the SURR BACK L/R speaker terminals do not. When Act is selected and Zone 2 turned off, the surround back speakers output sound as normal.
•Powered Zone 2 cannot be used if Speaker Type is set to
•This procedure can also be performed on the AV receiver by using its [Setup], [Enter], and arrow but- tons.
94