Listening to the
4 Use the Up and Down []/[ ] buttons to select “Antenna Aim- ing,” and then press [Enter]. The Antenna Aiming screen appears.
Position the SiriusConnect Home antenna so that as many bars as possible (up to 3) appear on the SIRIUS Satellite signal strength meter.
Antenna Aiming |
|
SIRIUS |
|
Satellite | Terrestrial |
SIRIUS ID | 000000000000 |
If you cannot receive a satellite signal, position the SiriusConnect Home antenna so that as many bars as possible (up to 3) appear on the SIRIUS Terres- trial signal strength meter.
SIRIUS Satellite Radio Messages
The following messages may appear while using SIRIUS Satellite Radio.
❑ACQUIRING
The SiriusConnect receiver is acquiring the signal or no signal is present. Make sure the SiriusConnect Home tuner is connected properly and that there are no obstacles close by.
❑ANTENNA ERROR
Make sure the SiriusConnect Home tuner is con- nected properly.
❑SUB UPDATED
Displayed while your subscription is being updated. No operations can be performed until this message has cleared.
❑UPDATING XXX%
Displayed while the channel map is being updated. Wait until the updating is complete.
❑SIRIUS UPDATING
Displayed while the SiriusConnect receiver’s firm- ware is being updated.
❑INVALID CHANNEL
Displayed if you select an unavailable channel.
❑CALL SIRIUS
Displayed when you select a channel to which you are not subscribed. Call SIRIUS if you want to sub- scribe.
❑CHECK SR TUNER
Displayed if the SiriusConnect receiver is not con- nected. Make sure the SiriusConnect receiver is con- nected properly, and make sure its AC adapter is plugged in.
64