Integra DTR-5.9 instruction manual Automatic Audio Input Selection Setup

First Time Setup—Continued

Automatic Audio Input Selection Setup

2, 3

1

When an input source is selected, the AV receiver checks the relevant audio inputs for the presence of an audio signal and automatically selects an input. With this set- ting, you can specify which audio inputs the AV receiver will check for signals.

1	Press the input selector button
	for the input selector whose set-
	ting you want to change.
	The setting for the Tuner input selector
	cannot be changed and is fixed at “Ana-
	log.”

2	Press and hold the [Enter]
	button.
	The current setting is displayed.

3	Press the [Enter] button repeat-
	edly to select an option.
	HDMIx (Auto):
	This option can be selected when an
	HDMI input is assigned to an input
	selector (page 44). When this option is
	selected, the relevant HDMI, digital,
	and analog inputs will be checked for
	the presence of an audio signal. If sig-
	nals are present at more than one input,
	the inputs will be selected in the follow-
	ing order of priority: HDMI, digital,
	analog.
	COAXx (Auto)/OPTx (Auto):
	This option can be selected when a dig-
	ital input is assigned to an input selector
	(page 45). When this option is selected,
	the relevant digital and analog inputs
	will be checked for the presence of an
	audio signal. If signals are present at
	more than one input, the inputs will be
	selected in the following order of prior-
	ity: digital, analog. Any audio signals
	present at the HDMI inputs will not be
	output.
	Analog:
	When this option is selected, the signal
	from the relevant analog audio input is
	output. Any audio signals present at
	HDMI or digital inputs will not be out-
	put.

Note:

•You can select a different option for each input selec- tor.

47