Playing Your AV Components
Basic AV Receiver Operation
3
1
1
3
1
AV receiver | Remote |
| controller |
Use the AV receiver’s input selector buttons to select an input source.
To select an input source with the remote controller, press its Input Selec- tor buttons.
To listen to a DVD player connected to the multichannel DVD input (page 26), press the AV receiver’s [Multi CH] button. The MULTI CH indicator will appear on the dis- play.
Note:
•While the multichannel DVD input is selected, the Speaker Configuration settings on page 82 are ignored, and signals from the multichannel input are fed to the speakers as they are.
2 | Start playback on the source component. |
| |
| To watch a DVD or other video source, on your TV, select the video input that’s con- |
| nected to the AV receiver’s COMPONENT VIDEO OUT, HDMI OUT, or MONITOR |
| OUT. |
| On some DVD players, you may need to change the digital or HDMI audio output |
| settings. |
3
AV receiver | Remote |
| controller |
To adjust the volume, use the Master Volume control or the remote con- troller’s [VOL] button.
Since the AV receiver is designed for home theaters, it has a wide volume range for precise adjustment. The volume can be set to Min, 1 through 79, or Max.
The maximum volume level can be limited with the Maximum Volume setting. See on page 88.
4 | Select a listening mode and enjoy! |
| |
| See “Using the Listening Modes” on page 67. |
|
|
48