Integra DTR-5.9 instruction manual CBL/SAT in S

Connecting Your Components—Continued

Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source

Hint!

With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs via the AV receiver, which is useful if your TV has no audio outputs.

Step 1: Video Connection

Choose a video connection that matches the video source ( A , B , or C ), and then make the connection.

You must connect the AV receiver to your TV with the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches the video source ( a , b , or c ), and then make the connection.

•With connection , you can listen to and record audio from the video source or listen in Zone 2.

•To enjoy Dolby Digital and DTS, use connection or . (To record or listen in Zone 2 as well, use and , or and .)

Connection		AV receiver	Signal flow	Video source	Picture quality
	A	COMPONENT VIDEO IN 2	⇐	Component video output	Best
		CBL/SAT IN S	⇐	S-Video output	Better
	B
	C	CBL/SAT IN V	⇐	Composite video output	Standard
		CBL/SAT IN L/R	⇐	Analog audio L/R output
	a
	b	DIGITAL IN COAXIAL 2	⇐	Digital coaxial output
		DIGITAL IN OPTICAL 1	⇐	Digital optical output
	c

b

c

A

SIRIUSAM

ANTENNA

FM C 75

B

a

				L		R
COAXIAL	OPTICAL	Y	PB	PR	AUDIO	S VIDEO	VIDEO
OUT	OUT	COMPONENT VIDEO OUT			OUT	OUT	OUT

Connect one or the other
Connection c must be
assigned (see page 45)	Satellite, cable, set-top box, etc.

29