Listening to the
Setup Enter
Number buttons
D.TUN
■Selecting Presets
AV receiver To select a preset, use the Preset
[]/[ ] buttons, or the remote controller’s CH
Remote
controller
You can also use the remote con- troller’s number buttons to select a preset directly.
■Deleting Presets
1Select the preset that you want to delete.
See the previous section.
2While holding down the [Mem- ory] button, press the [Tuning
Mode] button.
The preset is deleted and its number disappears from the display.
Parental Lock
With SIRIUS Parental Lock, you can lock out channels that you do not want to receive and use a
1 | Press the [Receiver] Remote |
| |
| Mode button, followed by the |
| [Setup] button. |
| The main menu appears onscreen. |
2 Use the Up and Down []/[ ] buttons to select “7. Hardware Setup,” and then press [Enter]. The Hardware Setup menu appears.
7. Hardware Setup
1.Remote Control
2.Zone2
3.Tuner
| 4. Analog Multich |
| 5. HDMI |
3 | Use the Up and Down [ ]/[ ] |
buttons to select “3. Tuner,” and then press [Enter].
The Tuner screen appears.
| |
SAT Radio Mode | SIRIUS |
Antenna Aiming |
|
SIRIUS Parental Lock |
|
Note: |
|
• If the SAT RadioMode is set to None (see page 57), the “Antenna Aiming” and “SIRIUS Parental Lock” items are not available.
4 Use the Up and Down []/[ ] buttons to select “SIRIUS Paren- tal Lock,” and then press [Enter]. The SIRIUS Parental Lock screen appears.
SIRIUS Parental Lock
Enter Code
0 1 2 3 4 5 6 7 8 9
“Enter : <0>” appears on the display.
60