Integra DTR-5.9 Changing the PIN Number, Listening to the Radio—Continued, appears, Setup closes

Listening to the Radio—Continued

5	Use the number buttons to enter
	the 4-digit PIN number.
	Or
	Use the Left and Right [ ]/[ ]
	buttons to select a number on the
	screen, and then press [Enter].
	Repeat this for each of the four
	digits in the PIN number.
or	If you’re entering the PIN number for
	the very first time, the PIN is stored,
	and the following screen appears.

SIRIUS Parental Lock

Edit Code

Parental Lock

If you’ve already set a PIN number, you must enter the correct PIN to get to this screen. If you enter the wrong PIN, the message “Wrong Code!” appears and you’ll have to enter the PIN again.

Use the Up and Down []/[ ] buttons to select “Parental Lock,” and then press [Enter].

SIRIUS Parental Lock

Edit Code

Parental Lock

The Parental Lock screen appears.

SIRIUS Parental Lock

Parental Lock
Channel				Status
xxxch	wwwwwwww		Unlocked
	:CHANNEL			:SAVE
			ENT
	:STATUS			:RETURN
			RET

6	Use the Up and Down [	]/[	]
	buttons to select a channel, and
	use the Left and Right [	]/[	]

buttons to select Locked or Unlocked.

The number, name, and status of the currently selected channel is displayed.

7	When you’ve finished, press
	[Enter] to save your changes, or
	press [Return] to return to the
	previous screen without saving.
	When [Enter] is pressed, the confirma-
	tion message “Locked” or “Unlocked”
	appears.

8	Press the [Setup] button.
	Setup closes.

Notes:

•While a channel is locked, it cannot be selected for listening.

•To unlock a channel, you must enter the correct PIN number and change it to Unlocked in step 6.

Changing the PIN Number

1	Press the [Receiver] Remote
	Mode button, followed by the
	[Setup] button.
	The main menu appears onscreen.

2 Use the Up and Down []/[ ] buttons to select “7. Hardware Setup,” and then press [Enter]. The Hardware Setup menu appears.

7. Hardware Setup

1.Remote Control

2.Zone2

3.Tuner

	4. Analog Multich
	5. HDMI
3	Use the Up and Down [ ]/[ ]

buttons to select “3. Tuner,” and then press [Enter].

Note:The Tuner screen appears.

7-3.Tuner
SAT Radio Mode	SIRIUS
Antenna Aiming
SIRIUS Parental Lock

Note:

If the SAT RadioMode is set to None (see page 57), the “Antenna Aiming” and “SIRIUS Parental Lock” items are not available.

61