Connecting Your
Video Connection Formats
Video equipment can be connected to the AV receiver by using any one of the following video connection formats: composite video,
Video input signals flow through the AV receiver as shown, with composite video, S- Video, and component video sources all being upconverted for the HDMI output.
The composite video,
When you connect audio equipment to an HDMI or COMPONENT input, you must assign that input to an input selector (see pages 44 and 45).
If signals are present at more than one input, the inputs will be selected automatically in the following order of priority: HDMI, component video,
In the Signal Selection Example shown on the right, video signals are present at both the
Video Signal Flow Chart
DVD player, etc.
Composite
IN
AV receiver
MONITOR OUT
Composite
TV, projector, etc.
Signal Selection Example
DVD player, etc.
Composite
IN
AV receiver
MONITOR OUT
Composite
TV, projector, etc.
The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the composite video or
23