Intel CB60-ZX, CB60-BX manual Jumper Settings for Clearing CMOS Data, Hardware Installation

Hardware Installation

Jumper JP2’s settings are shown below.

1	1	1
2	2	2
3	3	3
1-2 On: Auto	2-3 On: 66MHz	1-2-3 Off: 100MHz
(default)

2.5 Jumper Settings for Clearing CMOS Data

2

Jumper JP3

Clear CMOS Data

If, for some reason, the CMOS data becomes corrupted or you forgot the super visor/user/keyboard password, the system can be reconfigured with the default values stored in the ROM BIOS. To load the default values, power off your system and unplug the power cord. Set JP3 pins 2 and 3 to On. Wait for a few seconds and set JP3 back to its default setting, pins 1 and 2 On. You may now plug the power cord and power-on your system.

1

2

3

1

2

3

1-2 On: Normal	2-3 On:
(default)	Clear CMOS Data

15