Award BIOS Setup Utility
Video Off After
N/A The system BIOS will never turn off the screen. Suspend The screen is off when the system is in the Suspend
mode.
Standby The screen is off when the system is in the Standby mode.
MODEM Use IRQ
This category is used to set an IRQ channel (IRQ 3, 4, 5, 7, 9, 10 or
11)for the external modem installed in your system. However, if the “Resume on Ring” or “Resume on LAN” field is disabled, the BIOS will mask the IRQ assigned for the modem.This is to prevent the modem or LAN from waking up the system when it is in the Suspend mode.
Standby Mode
This is user configurable only when the Power Management category is set to User Defined. When enabled and after the set time of system inactivity, video will be shut off while all other devices still operate at full speed.
Suspend Mode
This is user configurable only when the Power Management category is set to User Defined. When enabled and after the set time of system inactivity, the CPU and onboard peripherals will be shut off.
HDD Power Down
This is user configurable only when the Power Management category is set to User Defined. When enabled and after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active.
VGA Active Monitor
Enabled When the system enters the Suspend mode, it will check the status of the VGA. If the VGA is active, it will not turn the screen off. If the VGA is inactive, it will turn the screen off.
Disabled When the system enters the Suspend mode, it will immediately turn the screen off without checking the status of the VGA.
3
39
