Intel CB60-ZX, CB60-BX Chipset Features Setup, OS Select for Dram 64MB, HDD S.M.A.R.T. Capability

Award BIOS Setup Utility

OS Select for DRAM > 64MB

This item allows you to access the memory that is over 64MB in OS/2.The options are: Non-OS/2 and OS/2.

HDD S.M.A.R.T. Capability

The system board supports SMART (Self-Monitoring, Analysis and Reporting Technology) hard drives. SMART is a reliability prediction technology for ATA/IDE and SCSI drives.The drive will provide sufficient notice to the system or user to backup data prior to the drive’s failure. The default is Disabled. If you are using hard drives that support S.M.A.R.T., set this field to Enabled. SMART is supported in ATA-3 or later hard drives.

3.1.3 Chipset Features Setup

ROM PCI/ISA BIOS

CHIPSET FEATURES SETUP

AWARD SOFTWARE, INC.

SDRAM RAS-to-CAS Delay	:	3		**** System Health Monitor ****
SDRAM RAS Precharge Time	:	3	Current System Temp.					:	28oC/82oF
SDRAM CAS Latency Time	:	3	Current CPU Temperature					:	42oC/107oF
SDRAM Precharge Control	:	Disabled	Current Chassis FAN Speed					:	0 RPM
DRAM Data Integrity Mode	:	Non-ECC	Current CPU FAN Speed					:	4326 RPM
System BIOS Cacheable	:	Disabled	CPU(V)		:	2.00	V
Video BIOS Cacheable	:	Disabled	+1.5 V		:	1.51	V
Video RAM Cacheable	:	Disabled	+3.3 V		:	3.40	V
8 Bit I/O Recovery Time	:	1	+ 5	V	:	5.08	V
16 Bit I/O Recovery Time	:	1	+12 V		:	12.34	V
Memory Hole At 15M-16M	:	Disabled	-12	V	: -11.76 V
PCI 2.1 Compliance	:	Disabled	- 5	V	: -5.09		V
AGP Aperture Size (MB)	:	64
CPU Clock Frequency	:	Default
Spread Spectrum	:	Disabled
			ESC	:	Quit		− ↓ → ←		: Select Item
			F1	:	Help		PU/PD/+/-		: Modify
			F5	:	Old Values (Shift) F2				: Color
			F6	:	Load Fail-Safe Settings
			F7	:	Load Optimal Settings

The settings on the screen are for reference only. Your version may not be identical to this one.

This section gives you functions to configure the system based on the specific features of the chipset. The chipset manages bus speeds and access to system memory resources. It also coordinates communications between the conventional ISA bus and the PCI bus. These items should not be altered unless necessary. The default settings have been chosen because they provide the best operating conditions for your system. The only time you might consider making any changes would be if you discovered some incompatibility or that data was being lost while using your system.

3

33