Intel CB60-BX, CB60-ZX manual Soft-Offby PWR-BTTN, PWR Lost Resume State, Resume On Ring

3

Award BIOS Setup Utility

Soft-Off by PWR-BTTN

This category allows you to select the method of powering off your system.

Hold 4 Sec. Regardless of whether the Power Management field is enabled or disabled, if the power button is pushed and released in less than 4 sec, the system enters the Suspend mode. The purpose of this function is to prevent the system from powering off in case you accidentally “hit” or pushed the power button. Push and release again in less than 4 sec to restore. Pushing the power button for more than 4 seconds will power off the system.

Instant-Off Pressing and then releasing the power button at once will immediately power off your system.

PWR Lost Resume State

Keep Off When power returns after an AC power failure, you must press the Power button to power-on the system.

Turn On When power returns after an AC power failure, the system will automatically power-on.

Last State When power returns after an AC power failure, the operating session where you left off before power failure occurs will resume.

Resume On Ring

With an external modem installed, the Modem Ring-on function will allow your system to power-on to respond to incoming calls. By default, the “Resume on Ring” field is Disabled.To use this function, please follow the steps below.

1.Make sure the computer system is powered off.

2.Connect the external modem to the COM 1 or COM 2 serial port.

3.Switch on the power of the external modem.

4.Power-on the computer system. After the memory test, press <Del> to enter the Award BIOS setup utility.

5.Select Power Management Setup and press <Enter>.

6.Enable the “Resume on Ring” field.

40