Intel CB60-BX, CB60-ZX manual Keylock Power/Standby LED and Keylock Connector

2

Hardware Installation

KEYLOCK: Power/Standby LED and Keylock Connector

Use pins 21-23 to connect to the Power/Standby LED. This LED will light when the system’s power is on and blinks when the system enters the Suspend mode.

Use pins 24 to 25 to connect to the keyboard lock (located on the front panel of the system chassis) for locking the keyboard.

	Pin	Pin Assignment
HD-LED	1	HDD LED Power
(Primary/Secondary IDE LED)	2	HDD
	3	N. C.
G-LED	4	Green LED Power
(Green LED)	5	Green
	6	N. C.
ATX-SW	7	PWRBT
(ATX power switch)	8	Ground
	9	N. C.
G-SW	10	SMI
(Green switch)	11	Ground
	12	N. C.
RESET	13	H/W Reset
(Reset switch)	14	Ground
	15	N. C.
SPEAKER	16	Speaker Data
(Speaker connector)	17	N. C.
	18	Ground
	19	Speaker Power
	20	N. C.
KEYLOCK	21	LED Power
(Keylock and Power LED	22	N.C.
connector)	23	Standby Signal
	24	Keylock
	25	Ground
		Use pins 21 to 23
		for the Power/
		Standby LED.

26