User’s Guide for Server Configuration Wizard (SCW) Utility
LAN Channel Screens LAN Channels 1 and 3 use similar configuration screens, which will be illustrated here only once.
Items that apply only for the GCM NIC (default is Channel 3) will not appear or will be grayed out
when the standard NIC is chosen. Advanced Features configuration is separate from GCM NIC
Channel configuration.
LAN Configuration, Screen 1 – Configure IP
Steps to complete Screen 1:
1. Choose Static IP or DHCP setup.
• The GCM NIC should have a static IP.
• If DHCP is chosen, all other entries will be filled in automatically.
• If Static is chosen, the option to Continue will not be available until all required entries are
completed. .
2. (Only required if Static is chosen.) Enter the server’s IP address and subnet mask and gateway.
• If less than three digits are required for a subsection of the address, either use the mouse or
the tab key to move to the next subsection.
3. (Only required if DHCP does not preset the gateway.) Either enter the MAC address of the
Gateway or click Resolve Gateway MAC Address (described in the next section).
— The Backup Gateway IP address is optional
Figure 10. LAN Screen 1 – IP Configuration
14