Intel ZT 4901 manual RedundantHostFunctionReturnValuesB

RedundantHostFunctionReturnValuesB

HSI_STATUS_SUCCESS	The specified operation completed
	successfully.
HSI_STATUS_BUS_NOT_FOUND	The operation failed because the
	required bus was not found.
HSI_STATUS_BUS_RESET	The operation failed because the
	required bus was in reset.
HSI_STATUS_BUS_SEG_NOT_CONTOLLED	The operation failed because the
	required bus segment was not
	controlled by the local Host.
HSI_STATUS_BUSY	The operation failed because the
	device was busy with some other
	operation.
HSI_STATUS_CANNOT_EXTRACT_LOCAL_DEVIC	The system detected a command
E	attempting to extract a device that
	resides on the local system master
	PCI bus. This is an illegal operation.
HSI_STATUS_CANNOT_INSERT_LOCAL_DEVICE	The system detected a command
	attempting to insert a device onto
	the local system master PCI bus.
	This is an illegal operation.
HSI_STATUS_DEVICE_ALREADY_EXISTS	The Redundant Host driver detected
	an attempt to add a backplane PCI
	device that is already being
	maintained by the RH driver.
HSI_STATUS_DEVICE_CREATION_FAILED	The creation of a Universal PCI
	Table entry failed.
HSI_STATUS_DEVICE_ENTRY_NOT_FOUND	A search for a Universal PCI Table
	entry failed to return any results.
HSI_STATUS_DEVICE_EXTRACTION_FAILED	The PCI Configuration Module was
	unable to successfully remove the
	device entry information from the
	Universal PCI Table located internal
	to the Redundant Host driver.
HSI_STATUS_DEVICE_INSERTION_FAILED	The PCI Configuration Module was
	unable to successfully insert the
	device entry information into the
	Universal PCI Table located internal
	to the Redundant Host driver.
HSI_STATUS_DEVICE_NOT_CONTROLLED	The operation failed because the
	specified device was not controlled
	by the local Host

High Availability Software for the Intel® NetStructureTM ZT 4901 Technical Product Specification 107