
| Slot Control API |
Reset - | The new reset state for the slot: TRUE means the slot is placed in the |
| reset state; FALSE means the slot is taken out of the reset state |
Return Value: |
|
HSI_STATUS_SUCCESS
if successful
HSI_STATUS_NOT_IMPLEMENTED
returned if slot reset functionality is not implemented for the given platform
HSI_STATUS_INVALID_PARAMETER
returned if the physical slot number does not correspond to any actual slot or if the handle is invalid
Other HSI_STATUS values
returned if other errors occurred during execution of this function
Synopsis:
This function sets the reset status for the specified slot. The reset status is specified by the Reset parameter: TRUE means assert reset to the slot; FALSE means
Reset is considered a state rather than an action: that is, if a board is put into the reset state, it remains in the reset state until it is taken out of the reset state.
This function is optional for the Hot Swap Controller; if it is not implemented by the hardware, HSI_STATUS_NOT_SUPPORTED is returned.
9.10HsiGetSlotM66Enable
Prototype:
HSI_API_DEF HSI_STATUS
HsiGetSlotM66Enable(
IN HSI_SLOT_CONTROL_HANDLE Handle,
IN UINT32 Slot, OUT BOOLEAN *pM66Enable )
Arguments: |
|
Handle - | the handle of the current session |
Slot - | the physical slot number |
pM66Enable - | pointer to the location where the state of the M66EN line for the |
| specified slot is placed (TRUE: 66 MHz operation is enabled for the slot; |
| FALSE: 66 MHz operation is not enabled for the slot). |
Return Value:
HSI_STATUS_SUCCESS
if successful
HSI_STATUS_NOT_IMPLEMENTED
returned if slot reset functionality is not implemented for the given platform
High Availability Software for the Intel® NetStructureTM ZT 4901 Technical Product Specification | 91 |