1.2.2Power
The UDAS unit normally uses power from the host computer via the USB cable. Power can also be obtained from an external power supply that is available (See Appendix B, Accessories). When the UDAS unit is connected to a power source, the computer controls the power. The unit does not have a power switch. There is an LED labeled PWR located on the front panel that indicates power to the unit, regardless of its source.
The USB specification imposes strict requirements on power usage. If an external power supply is used, up to 200 mA at +5 VDC is available to external termination circuits (available at
See section 1.3, Software Support and Accessories or Appendix B, Accessories for the part numbers of the available Power Adapters. If the power is supplied from the PC through the USB port, care must be taken to limit the load from the external termination panel to less than 20 mA.
1.3 Software Support and Accessories
1.3.1Software Support
Diagnostic
UDAS SYSCHECK
UDAS SYSCHECK software for Windows is an
Development
Visual Designer Application Generator
Visual Designer is a powerful,
To create custom applications in a fraction of the time it takes when using a programming language, Visual Designer is able to combine
1- 11