Analog Input and Output Calibration Procedures

C.2 UDAS Analog Output Circuit Calibration Procedure

This section applies to models UDAS-1001E-2, UDAS-1001E-2G, and UDAS-1001E-4that are equipped with the analog output feature.

The analog output channels on the UDAS unit are calibrated at the factory. If your application requires periodic calibration checks or if you suspect inaccuracies, use the following procedures to calibrate the unit. This calibration is accomplished by adjustment of potentiometers on the unit’s printed circuit board.

Note: This calibration procedure requires the utility software provided with the unit, or some other software such as Visual Designer for setting the Analog Output levels.

Equipment Required:

•Precision Voltmeter accurate to 100 µV over a range of ±10 V.

•Termination panel for connecting signals and test instruments.

•1.4 mm flat-head insulated screwdriver for adjusting potentiometers.

•#1 Phillips screwdriver and a small wrench or nut driver for opening the unit’s case.

•USB equipped host computer.

CAUTION:

STATIC SENSITIVE DEVICE WARNING! To avoid damage to the unit from static electricity, always use proper static protective procedures (such as use of a grounded wrist strap) when handling or adjusting this device.

Instructions for opening the unit’s case are listed at the beginning of section C.1.1 Removing the UDAS Unit’s Cover on page C-1.

Connect the UDAS to the host computer and allow at least a 15 minute warm-up period before making any adjustments. See FIGURE C.1 Locations of Potentiometers for Adjusting Analog Circuits on page C-2.

CAUTION:

The unit may become damaged if you use an uninsulated screwdriver and accidentally touch other components.

C-6

Page 60 Page 62
Page 61
Image 61
Intelligent Motion Systems UDAS-1001E user manual Udas Analog Output Circuit Calibration Procedure, Equipment Required
Page 60 Page 62

UDAS-1001E specifications

The Intelligent Motion Systems UDAS-1001E is a cutting-edge multi-axis motion control system designed for high-precision applications across various industries. This advanced device stands out for its versatility and ease of integration, making it an ideal choice for robotics, CNC machinery, and other automated processes.

One of the key features of the UDAS-1001E is its capability to control up to four axes simultaneously. This multi-axis functionality allows for complex motion trajectories that are essential in modern automation and robotics. With its high-speed processing capabilities, the UDAS-1001E can execute commands in real-time, providing operators with precise control and allowing for seamless synchronization among connected systems.

The UDAS-1001E utilizes advanced control algorithms that are designed to optimize motion performance. These algorithms enhance acceleration and deceleration profiles, thereby improving overall efficiency while also reducing wear on mechanical components. The system supports various feedback devices, including encoders and resolvers, ensuring accurate positioning and smooth operation.

Another notable characteristic of the UDAS-1001E is its robust communication interfaces. The system is equipped with multiple communication protocols, such as Ethernet and CAN bus, enabling easy integration with existing systems and peripherals. This flexibility allows engineers to design customized solutions that fit specific operational requirements.

In terms of user interaction, the UDAS-1001E features an intuitive user interface that simplifies programming and operation. Users can easily set up motion parameters, monitor performance metrics, and troubleshoot issues in real-time. The system also supports graphical programming environments, enabling the development of complex motion profiles without extensive coding knowledge.

Furthermore, the UDAS-1001E prioritizes safety with its built-in safety features. These include emergency stop functions, fault detection, and safe torque off capabilities, which are essential for protecting both equipment and personnel in industrial settings.

In summary, the Intelligent Motion Systems UDAS-1001E is a sophisticated motion control solution packed with essential features and technologies. Its multi-axis control, advanced algorithms, versatile communication capabilities, and user-friendly interface make it a valuable asset for businesses seeking to enhance the precision and efficiency of their automated systems. As industries continue to evolve towards increased automation, the UDAS-1001E stands out as a reliable choice for achieving superior motion control.
Top Page Image Contents