6ARMS
6.4Replacing Desk/Full Length Armrest Pad (Fixed Height Arms Only)
1.Remove the mounting screws that secure the armrest pad to the armrest assembly.
2.Replace armrest pad and securely tighten with the existing mounting screws.
6.5Replacing Clothing Guards (Fixed Height Arms Only)
1. | Remove the four mounting screws that secure the existing clothing |
| guard to the armrest assembly. |
2. | Install new clothing guard and securely tighten with the existing |
Mounting Screws
Clothing
Guard
Mounting Screws
Armrest Pad
Armrest
Assembly
Mounting Screws
mounting screws. |
6.6Converting Between Space Saver and Conventional Arms
Space Saver arms DO NOT work with the following:
•Adjustable angle back option
•Jymni Recliner
For this procedure, refer to FIGURE 5 on page 43.
1.Remove the arms from the wheelchair. Refer to Removing or Replacing Armrest on page 41.
2.Remove the locknut and hex screw that secure the arm socket to the wheelchair frame.
3.Repeat STEP 2 for the opposite side of the wheelchair.
4.Reposition the arm socket to one of two positions:
A.For conventional arms - position arm socket on outside of frame.
B.For space saver arms - position arm socket on inside of frame.
Invacare® Jymni™ Pediatric Series Wheelchair | 42 | Part No 1100868 |
