Placing In Stored Position | Invacare 9000 STANDARD WEIGHT guide

11 RECLINER

Placing In Stored Position

1.Remove one locking knob from the spreader bar.

2.Loosen the remaining locking knob on the spreader bar.

3.Rotate detached end of the spreader bar 90° down toward floor.

Replacing Spreader Bar

1.Remove both locking knobs that secure the spreader bar to the side frames.

2.Remove existing spreader bar.

3.Secure new spreader bar to the side frames with the existing locking knobs. Securely tighten.

11.6 Adjusting the Seat Width and Depth

WARNING

The seat depth and width directly relates to the stability of the recliner. Any change may cause the recliner to decrease in stability. This procedure MUST be performed by a qualified technician.

Locking

Knob

	Side Frame
	Spreader
	Bar
	Recliner
	Tube
	Locking Knob
	FIGURE 6 Storing/Replacing Spreader Bar
Locking	Spreader Bar
Knobs	Side Frame
	Side Frame

Side Frame

FIGURE 7 Replacing Spreader Bar

Invacare® Jymni™ Pediatric Series Wheelchair

64

Part No 1100868

Image 64

Invacare 9000 STANDARD WEIGHT Placing In Stored Position, Replacing Spreader Bar, Adjusting the Seat Width and Depth

Contents

Page Invacare Jymni Pediatric Series Wheelchair Contents Arms ANTI-TIPPERS/WHEEL Locks Symbols General Limited Warranty Overview Label LocationsCrossmember Lower Frame Tube Models with Quick-Release Axles Only On all adjustable Anti-tippersJymni Recliner Models Only Typical Product Parameters 19 or 23 inches Permanent35½ to 39¼ inches Aluminum Component Identification Front Caster Safety General Guidelines Operating Information Anti-tippers General Warnings Hand Grips Information for Healthcare Professionals/Assistants Lifting Repair and Service InformationRamps, Slopes, Inclines and Obstacles Weight Limitation Weight TrainingSeat Positioning Strap Tire Pressure Wheelchair Tie Down Restraints Wheel LocksWheelchair User Stability and Balance Safety/Handling of WheelchairsRecliner Models Only Refer to the procedure that is checked to maintain Forward Reaching, Leaning and Bending Forward or SidewaysBackwards Coping With Everyday Obstacles TippingMethod 1 Wheelchair With Step Tubes Step Tube Stairways Method 2 Wheelchair Without Step Tubes Moving Up Stairs Moving Down Stairs Escalators Transferring To and From Other Seats Unfolding and Folding Wheelchair Unfolding Sling Seat Folding Sling Seat Unfolding/Folding Solid Seat Model Wheelchairs Safety Inspection Checklist Safety Inspection/TroubleshootingInspect/Adjust Initially Inspect/Adjust Weekly Inspect/Adjust Monthly Troubleshooting Inspect/Adjust PeriodicallySolutions Casters Squeaks Suggested Maintenance Procedures Maintenance Maintenance Safety PrecautionsDamage may result Replacing/Repairing Rear Wheel Tire/Tube Replacing/Repairing Caster Tire/Tube Transporting the Invacare Jymni Installing Installing/Removing the Swingaway Footrest AssemblyFront Riggings Removing Swingaway Footrest Height Adjustment Upper Footrest Support Bolt Locknut Lower Footrest AssemblyJ932A-14 J932A and J933A Elevating Legrest J934A-14 only JA932AJA932A-14 J934A-14 Step Installing/Removing Elevating Legrest AssemblySteps 2 Lowering Legrest Assembly Adjusting CalfpadAdjusting Height Detail a Adjust armrest to one of five positions Adjusting Armrest HeightArms Using Swing-Back Arms Armrest Release Lever Rear Arm Socket Removing or Replacing Armrest Removing ArmrestsReplacing Armrests Post Guard to the armrest assembly Mounting Screws Clothing Guard Armrest Pad AssemblyReplacing Clothing Guards Fixed Height Arms Only Converting Between Space Saver and Conventional Arms Space Saver Arm Position Conventional Arm Position Seat and Back Replacing Seat Upholstery Washer Mounting Screws Back Upholstery Back Cane Replacing Back UpholsteryBack Cane Wheelchair Frame Locknuts Mounting Screws Adjusting Back Height Cane to the wheelchair frame are not shown for clarity Adjusting Seat Width and Depth Rear Wheels Removing/Installing Rear WheelsPermanent Axles Quick-Release Axles Detail a Detent balls and detent pinInside Wheelchair Outside Wheelchair Adjusting the Quick-Release Axle Wheelchair Frame Locknut Locking Pins Replacing Rear Wheel Handrim Replacing Rear Wheel Handrim Installing/Replacing Front Casters and Forks Front Casters Replacing/Repairing Front Caster Tire/Tube Adjusting Front Caster Mounting Installing/Adjusting Anti-tippers Anti-tippers/Wheel Locks Installing Anti-Tippers 1101959 1058752Anti-Tipper Release Buttons Rear Frame Tubing Anti-Tipper Length Adjusting Anti-Tippers Inches Using Patient Operated Wheel Locks Push-To-LockPull-To-Lock Pull wheel lock handle toward the tire to engage wheel lock Adjusting Patient-Operated Wheel Locks Adjusting Patient-Operated Wheel LocksWheel Lock Wheel Lock Shoe Rear Wheel Inch 3/16-inch pneumatic tires Wheel Lock Shoe Tire Recliner Operating Recliner Upright Position Reclined Position Installing/Removing Headrest Extension Replacing Headrest Pillow Back Upholstery Replacing Headrest/Back Upholstery Headrest UpholsteryKnob Back Upholstery Adjusting Headrest/Back Upholstery Tension Storing/Replacing Spreader Bar Storing Spreader BarRemoving From Stored Position Headrest Upholstery Spreader Bar Back Placing In Stored Position Adjusting the Seat Width and DepthReplacing Spreader Bar Installing Telescoping I.V. Rod/O2 Holders Options Cleaning Detail a I.V. Rod/O Detail B O 2 holder HolderTie Wrap Step Tube Locknut Installing the 1-inch Forward Rear Wheel Positioner Wheel Positioner Installing/Adjusting Stroller Handles Removing Height AdjustmentRepeat Steps 1-3 for the opposite stroller handle Repeat Steps 1 3 for the opposite stroller handle Installing/Removing the Solid Back Insert Installing/Removing the Solid Seat Insert InstallingInstalling the Wheel Lock Extension Handle Invacare Jymni Pediatric Series Wheelchair Invacare Jymni Pediatric Series Wheelchair Canada One Invacare Way