Invacare 9000 STANDARD WEIGHT user manual Installing/Removing the Solid Seat Insert Installing

12 OPTIONS

12.5Installing/Removing the Solid Seat Insert Installing

1.Position the solid seat insert so that it is fully supported by the seat rails and the back edge of the solid seat insert is touching the back canes.

Removing

1.Firmly grasp the solid seat insert and lift it away from the seat upholstery.

12.6 Installing/Removing the Solid Back Insert

Installing

1.Position the solid back insert between the back canes.

2.Wrap the two fastening straps around the back canes. Securely fasten with the two snaps.

Removing

1.Release the two snaps securing the two fastening straps around the back canes and remove the solid back insert.

12.7 Installing the Wheel Lock Extension Handle

￿	WARNING
	If the wheelchair is equipped with push to lock wheel
	locks, elevating legrests, and wheel lock extension handles,
	the wheel lock extension handles MUST be removed
	before swinging the elevating legrests to the side,
	otherwise injury or damage may result. Interference
	between the top of the elevating legrest and the wheel
	lock extension handle causes the wheel lock to disengage.

1.Remove the existing rubber tip from the wheel lock handle (Detail “A”).

2.Install the extension handle over the wheel lock handle (Detail “B”).

Detail “A”

Rubber Tip

Wheel Lock

Handle

Wheel Lock

Detail “B”

Wheel Lock

Extension

Handle

Wheel Lock

Handle

Wheel Lock

FIGURE 4 Installing the Wheel Lock Extension Handle

Part No 1100868 69 Invacare® Jymni™ Pediatric Series Wheelchair