4 SAFETY INSPECTION/TROUBLESHOOTING
Part No 1100868 31 Invacare® Jymni™ Wheelchair
4.3 MaintenanceMaintenance Safety PrecautionsSuggested Maintenance Procedures
1. Before using your Jymni Series wheelchair, make sure all nuts and bolts are tight.
2. Check all parts for damage or wear and replace.
3. Check all parts for proper adjustment.
4. Standard and Light Weight Models ONLY - Keep quick-release axles free of dirt and lint to ensure positive locking and proper operation. Refer
to Adjusting the Quick-Release Axle on page50.
5. Oil quick-release axles at least once a month (3-in-1 oil® or equivalent).
6. The rear wheels, casters and tires should be checked periodically for cracks and wear, and should be replaced by a qualified technician if damaged
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may result.
DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame tubing.
WARNING
DO NOT use the wheelchair unless it has the proper tire pressure (p.s.i.).
DO NOT overinflate the tires. Failure to follow these suggestions may cause the tire to explode and cause bodily harm.
The recommended tire pressure is listed on the sidewall of the tire.
CAUTION
As with any vehicle, check the wheels and tires periodically for cracks and wear. Replace if damaged. Refer to Replacing/Repairing Rear
Wheel Tire/Tube on page32 and Replacing/Repairing Caster Tire/Tube on page 33.