Invacare 9000 STANDARD WEIGHT user manual Installing the 1-inch Forward Rear Wheel Positioner

12 OPTIONS

12.3 Installing the 1-inch Forward Rear Wheel Positioner

￿ WARNING

DO NOT use the 1-inch forward bracket on recliner wheelchairs OR adjustable angle back wheelchair. Otherwise injury or damage may occur.

Recliners and Wheelchairs with 1-Inch Forward Rear Wheel Positioner Only: Anti-tippers MUST BE attached at all times.

1.Remove both rear wheels from the wheelchair. Refer to

Removing/Installing Rear Wheels on page 48.

2.	Position the right hand 1-inch forward rear wheel positioner onto the		Spacer
	right hand side of the wheelchair frame (FIGURE 2).
		Right and left hand sides of the wheelchair are	Mounting Screw
		determined from the users position.
3.	Secure the 1-inch forward rear wheel positioner to the wheelchair frame
	using the two mounting screws, spacers and locknuts.		1-Inch Forward Rear	Locknuts
4.	Repeat STEPS 2-3 to Install the left hand 1-inch forward wheel positioner.
			Wheel Positioner
5.	Reinstall the rear wheels onto the 1-inch forward brackets. Refer to
	Removing/Installing Rear Wheels on page 48.		Mounting Screw
6.	If necessary, install the anti-tippers. Refer to Installing/Adjusting
	Anti-tippers on page 54.			Spacer
			FIGURE 2 Installing the 1-inch Forward Rear Wheel Positioner

Part No 1100868 67 Invacare® Jymni™ Pediatric Series Wheelchair