10 ANTI-TIPPERS/WHEEL LOCKS
Part No 1100868 57 Invacare® Jymni™ Pediatric Series Wheelchair

10.2 Using Patient Operated Wheel Locks

1. Ensure the wheelchair is not moving before engaging the wheel
locks.
2. Depending on the model of wheel lock installed on the wheelchair,
perform one of the following:
Push-to-Lock - To engage, push the wheel lock handle
forward.
Pull-to-Lock - To engage, pull the wheel lock handle backward.
3. Disengage the wheel locks by reversing STEP 2.
FIGURE3 Using Patient Operated Wheel Locks
WARNING
After any adjustments, repair or service and before use,
make sure all attaching hardware is tightened securely.
Otherwise injury or damage may occur.
WARNING
DO NOT attempt to stop a moving wheelchair with
wheel locks. Wheel locks are not brakes.
Position wheelchair on a flat, level surface to perform
this procedure.
Unlocked Position
Wheel Lock
Push wheel lock handle forward away from the tire to
engage wheel lock
Locked Position
Pull wheel lock handle toward
the tire to disengage wheel lock

Push-To-Lock

Pull-To-Lock

Pull wheel lock handle toward the tire to engage wheel lock
Unlocked Position
Wheel Lock
Push wheel lock handle away from
the tire to disengage wheel lock
Locked Position