Cisco Systems Cisco uBR10012 manual Reinstalling the Modules

Contents

	Recommended Tools and Supplies				3-26
	Attaching the Grounding Cable			3-26
	Connecting DC Power to the Cisco uBR10012 Router							3-28
	Recommended Tools and Supplies				3-29
	Connecting the Cisco uBR10012 Chassis to a DC Power Source									3-29
	Connecting Alarm Indicators		3-31
	Recommended Tools and Supplies				3-32
	Connecting the Alarm Indicators				3-32
	Reinstalling the Modules	3-34
	Recommended Tools and Supplies				3-34
	Reinstalling the Fan Assembly Module					3-34
	Reinstalling the DC Power Entry Modules						3-35
	Reinstalling the AC Power Entry Modules						3-36
	Reinstalling the Line Cards and Uplink Cards						3-39
	Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card									3-42
	Installing the Slot Splitter		3-42
	Installing the Half-Height Gigabit Ethernet Line Card								3-46
	Connecting the Console Port and Auxiliary Port						3-49
	Recommended Tools and Supplies				3-49
	Connecting to the Console Port			3-49
	Connecting to the Auxiliary Port				3-51
	Connecting Network Management Cables					3-52
	Ethernet Network Management Cable Connections								3-52
	Connecting to a 10Base-T Ethernet Network							3-52
	Connecting to a 100Base-T Ethernet Network								3-53
	Connecting Cable Interface Line Cards and Network Uplink Cards 3-55
	Cable Interface Line Card Connections					3-55
	Network Uplink Cable Connections				3-55
	Connecting a Single-Port Gigabit Ethernet Line Card 3-56
	Replacing the Front Cover	3-58
	Powering On the System	3-60
	Configuring the Cisco uBR10012 Router at Startup							3-62
	Startup Display 3-62
	Basic Configuration Using the Setup Facility						3-63
	System Configuration Dialog				3-63
	Configuring the System Using System Configuration Dialog									3-63
	Setting Up the Interface			3-64
	Basic Configuration in Global Configuration Mode								3-65
	Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
vi										OL-18259-01