Cisco Systems Cisco uBR10012 manual Manufacturer Web Site or Phone Number Products/Model

Appendix D Manufacturers for Headend Provisioning Requirements

North American Channel Plans

Table D-1 Manufacturers for North American Headend Provisioning Requirements (continued)

Manufacturer1	Web Site or Phone Number	Products/Model
White Sands Engineering, Inc	http://www.whitesandsengineering.com	Coaxial jumpers
	1 800-jumpers or 602 581-0331
GPS Receivers
Agilent3	http://www.tm.agilent.com	Agilent 85960B, 85961B
Symmetricom	http://www.symmetricom.com	TS2500, TS2700, TS3000

1.The lead times for upconverters can run from 2 to 18 weeks. Contact the upconverter manufacturers listed above for current information on lead times.

2.Formerly General Instrument

3.Formerly Hewlett-Packard Test and Measurement Division.

In addition, Cisco recommends the following manufacturers, web sites, and product offerings for various measurement devices you will need to prepare and provision a North American cable headend site for two-way data.

Table D-2 Manufacturers for North American Headend Measurement Devices

Manufacturer	Web Site or Phone Number	Products/Model
Digital Signal Level Meters/QAM Analyzers
Acterna	http://www.acterna.com	SDA-5000, w/Option 4B
Agilent1	http://www.tm.agilent.com	Agilent 8594Q, N1776A
Telsey2	http://www.telsey.it	DMA120, DMA122
Sencore	http://www.sencore.com	QAM-B970
Sunrise Telecom3	http://www.sunrisetelecom.com	CR1200R, AT2000RQ
Trilithic	http://www.trilithic.com	860DSP w/Option QA1
Spectrum Analyzers
Agilent	http://www.tm.agilent.com	Agilent 8591C, N1776A
Tektronics	http://www.tek.com	2715
Sunrise Telecom	http://www.sunrisetelecom.com	AT2000R
Vector Signal Analyzers
Agilent	http://www.tm.agilent.com	Agilent 89411A

1.Formerly Hewlett-Packard Test and Measurement Division.

2.Formerly Tektronics DMA division

3.Formerly Hukk Engineering and Avantron.

Cisco uBR10012 Universal Broadband Router Hardware Installation Guide

D-2 OL-18259-01