Cisco Systems Cisco uBR10012 manual Basic Configuration in Global Configuration Mode

Models: Cisco uBR10012

1 304
Download 304 pages 40.3 Kb
Page 149
Image 149

Chapter 3 Installing the Cisco uBR10012 Router

Configuring the Cisco uBR10012 Router at Startup

Step 5 Specify the IP address.

IP address for this interface: 172.27.48.209

Step 6 Enter the subnet mask for the IP address.

Subnet mask for this interface [255.255.0.0] : 255.255.0.0

The system displays the information you entered as well as several default commands, such as the no shutdown command.

For example:

The following configuration command script was created: hostname c10012

enable secret 5 $$1$uror$EFU0hKOBQXhk975qKFZlL0 enable password <xxx>

line vty 0 4 password <xxx> no snmp-server

!

no ip routing

!

interface FastEthernet0/0/0 no shutdown

media-type 100BaseX half-duplex

ip address 172.27.48.209 255.255.0.0

!

end

Step 7 The setup script concludes by giving you the choice to exit without saving, start the setup script, or save the configuration file:

[0]Go to the IOS command prompt without saving this config.

[1]Return back to the setup without saving this config.

[2]Save this configuration to nvram and exit.

Enter your selection [2]:

Step 8 After you complete the configuration dialog, enter global configuration mode and enable ip routing by entering the ip routing command:

router(config)#ip routing

Basic Configuration in Global Configuration Mode

The following command sequence allows you to perform a configuration similar to that generated by the setup command.

Router>configure terminal

Router(config) #hostname c10012

Router(config) #enable secret <my_router>

Router(config) #enable password <my_rtr>

Router(config) #snmp-server community public

Router(config) #ip routing

Router(config) #interface FastEthernet0/0/0

Router(config-if) #no shutdown

Router(config-if) #media-type 100BaseX

Router(config-if) #half-duplex

Router(config-if) #ip address 192 255.255.0.0

Router #copy running-config startup-config

 

 

Cisco uBR10012 Universal Broadband Router Hardware Installation Guide

 

 

 

 

 

 

OL-18259-01

 

 

3-65

 

 

 

 

 

Page 149
Image 149
Cisco Systems Cisco uBR10012 Basic Configuration in Global Configuration Mode, Routerconfig #interface FastEthernet0/0/0