Cisco Systems Cisco uBR10012 manual Cable Interface Line Card Connections

Chapter 3 Installing the Cisco uBR10012 Router

Connecting Cable Interface Line Cards and Network Uplink Cards

Connecting Cable Interface Line Cards and Network Uplink Cards

Because there are very specific requirements for cabling the different line cards and uplink cards used with the Cisco uBR10012 CMTS, please review the documentation for the cards that you are installing in your system.

Cable Interface Line Card Connections

For cabling instructions, refer to the appropriate cable interface line card documentation at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/cable/ubr10k/ubr10012/frus/index.htm

Network Uplink Cable Connections

These cards use fiber optic connections which require specific cleaning and preparation before they are cabled. For cleaning and inspecting instructions for the fiber optic connections, see Inspection and Cleaning Procedures for Fiber-Optic Connections at the following URL:

http://www.cisco.com/en/US/tech/tk482/tk876/technologies_white_paper09186a0080254eba.shtml

For cabling instructions, refer to the appropriate network uplink card documentation at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/cable/ubr10k/ubr10012/frus/index.htm

Warning Class 1 laser product. Statement 1008

Warning Invisible laser radiation present. Statement 1016.

Warning Because invisible laser radiation may be emitted from the aperture of the port when no cable is connected, avoid exposure to laser radiation and do not stare into open apertures. Statement 1056.

Warning Statement for Sweden

Warning Osynlig laserstrålning när denna del är öppen och förregleringen är urkopplad. Rikta inte blicken in mot strålen. Statement 36.

Warning Statement for Finland

Warning Alleviates ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Äjä katso säteeseen. Statement 35

	Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01		3-55