Cisco Systems Cisco uBR10012 Cisco uBR10-SRP-OC12SMLDPT WAN Line Card LEDs, Rx Carrier-B, Enabled

Chapter 1 Cisco uBR10012 Universal Broadband Router Overview

Network Uplink Cards

Cisco uBR10-SRP-OC12SMLDPT WAN Line Card LEDs

Table 1-22describes the LEDs and their functions on the Cisco uBR10-SRP-OC12SML DPT WAN line card.

Table 1-22	Cisco uBR10-SRP-OC12SML DPT WAN Line Card LEDs and Their Functions
LED		Color/Status	Description
POWER		Green	Power is being supplied to the Cisco uBR10-SRP- OC12SML DPT WAN line
			card
		Off	Power off
STATUS - bi-color		Yellow	The CPU is in the bootup process, self test, or downloading code
		Green	The CPU has successfully completed the boot, self test, and code download
			process, and that the Cisco uBR10-SRP- OC12SML DPT WAN line card is
			the active card
MAINT		Off	Normally off, no maintenance action is required
		Yellow	Indicates a required maintenance operation and that the Cisco uBR10-SRP-
			OC12SML DPT WAN line card can be hot-swapped
RX CARRIER–B		Green	The DPT port WAN has detected valid SONET or SDH framing on the
			received carrier.
		Off	No valid SONET or SDH framing
ACTIVE		Green	Side B of the DPT port line is functioning
		Off	Not active
RX PKTS (Packets)		Blinking Green	The DPT port line has received a packet. This LED flickers in normal
			operation, indicating traffic
		Off	No traffic
RX CARRIER–A		Green	The DPT port line has detected valid SONET or SDH framing on the received
			carrier
		Off	No valid SONET or SDH framing
ACTIVE		Green	Side A of the DPT port line is functioning
		Off	Not active
RX PKTS (Packets)		Blinking Green	The DPT port line has received a packet. This LED flickers during normal
			operation indicating traffic.
		Off	No traffic
PASS-THROUGH		Amber	The DPT port line is in a pass-through state
		Off	Not active
ENABLED		Green	The DPT port line is enabled for operation; however, the interface port might
			be in the shutdown state
		Off	Not active

	Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
1-44	OL-18259-01