Cisco Systems Cisco uBR10012 manual Cisco uBR10-LCP2-MC16xLEDs, Color Description, Enable, Mgr Act

Chapter 1 Cisco uBR10012 Universal Broadband Router Overview

Cable Interface Line Cards

The Cisco uBR10-LCP2-MC16S cable interface line card has one downstream port and six upstream ports. The upstream ports are labeled US0 through US5. The downstream port is labeled DS. There are six LEDs labeled MGR ACT (manager active) next to each upstream port. See Table 1-11for a description of the LCP2 adapter card LEDs and Table 1-12for descriptions of the cable interface line card LEDs and their functions.

Cisco uBR10-LCP2-MC16xLEDs

The Cisco uBR10-LCP2 adapter card and the cable interface line card each have their own set of status LEDs on the front of the module. The adapter card LEDs are described in Table 1-11. The

Cisco uBR10-MC16xcable interface line card LEDs are described in Table 1-12.

Table 1-11describes the adapter card LEDs and their functions.

Table 1-11	Cisco uBR10-LCP2 Adapter Card LEDs and Their Functions
LED		Color	Description
POWER		Green	Power is being supplied to the LCP2.
		Off	Power is off.
STATUS		Yellow	The Cisco uBR10-LCP2 adapter card is in the bootup process, is in self test, or
			is downloading code
		Green	The Cisco uBR10-LCP2 adapter card has successfully completed the boot, self
			test, and code download process
Status LED on N+1 or		Blinking green	The board is in Standby or Protect card mode
redundant card in chassis
MAINT		Off	Normally off, no maintenance action is required.
		Yellow	It is safe to remove the entire assembly (adapter card plus cable interface line
			card) from the chassis

Table 1-12describes the cable interface line card LEDs and their functions.

Table 1-12		Cisco uBR-MC16x Cable Interface Line Card LEDs and Their Functions
	LED		Status	Description
	ENABLE		Green	The cable interface line card is operating normally, receiving DC power from the
				router midplane, and configured for operation
			Off	The card is shut down or the slot is not working
	Upstream		Green	For each upstream port, indicates that the upstream path is enabled and
				configured
			Off	The port is not properly configured, or is shut down, or the slot is not working
	Downstream		Green	For each downstream port, indicates that the downstream path is enabled and
				configured.
			Off	The port is not properly configured, or is shut down, or the slot is not working
	MGR ACT		Green	Spectrum management activity on the channel.
	(uBR-MC16S only)		Off	Spectrum management is not active.
				Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
	OL-18259-01				1-31