Cisco Systems Cisco uBR10012 manual Purpose, Audience, Revision History Date Reason

Preface

This section describes the purpose, audience, organization, and conventions used in this guide. This section also provides a revision history and a list of related documents as well as instructions for obtaining technical assistance and additional information.

Revision History

Date	Revision	Reason
12/15/2008	OL-18259-01	Updated with PRE4 information. Moved the document to online
		only.
04/05/2006	78-11450-03	Updated Table 3-6.
	Rev.B0
06/28/2005	OL-5000-03	Added HHGE line card information.
10/18/2004	OL-5000-02	Updated with PRE2 information.
12/20/2003	OL-5000-01	Moved document to online only, updated format, added AC PEM
		specifications, and corrected PEM information, corrected PRE
		information, revised line card installation procedure.
03/20/2001	78-11450-03	Original publication and updates.

Purpose

This installation guide explains the initial hardware installation and basic configuration procedures for the Cisco uBR10012 universal broadband router. It contains procedures for installing the router hardware, creating a basic software configuration file, and starting up the router. After you complete the installation and basic configuration procedures covered in this guide, use the appropriate companion publications to more completely configure your system. See the documents listed in the “Related Documentation” section on page xii.

Audience

To use this publication, you should be familiar not only with Cisco router hardware and cabling, but also with electronic circuitry and wiring practices. You should be able to perform basic network configuration procedures, and preferably have experience as an electronic or electromechanical technician.

Cisco uBR10012 Universal Broadband Router Hardware Installation Guide

OL-18259-01 xi