Cisco Systems manual Cisco uBR10012 Chassis and Chassis Components, Description Specifications

A P P E N D I X A

Technical Specifications

This appendix provides specifications information about the Cisco uBR10012 router, router components, and cards used in the router.

•Cisco uBR10012 Chassis and Chassis Components, page A-1

•Network Uplink Cards and Cable Interface Line Cards, page A-6

Cisco uBR10012 Chassis and Chassis Components

Table A-1lists the physical specifications for the Cisco uBR10012 universal broadband router and its components.

Table A-1		Cisco uBR10012 Router and Router Components Physical Specifications
	Description		Specifications
	Chassis specifications		• Weight: 235 lb (106.6 kg) fully configured chassis
			• Height: 31.25 in. (79.4 cm)—18 Rack Units (RU)
			• Width: 17.2 in. (43.7 cm)
			• Depth: 22.75 in. (57.8 cm)
			• Mounting: 19 in. rack mountable (front or rear),
				2 units per 7 ft. rack
			Note Mounting in 23 in. racks is possible with optional third-party hardware.
	Temperature range		•	Operating: 41 to 104° F (5 to 40° C)
			•	Storage: −40 to 158° F (−40 to 70° C)
	Relative humidity		• Operating—nominal: 5 to 85 percent
			• Storage: 5 to 95 percent
	Operating altitude		–197 to 13,123 ft. (–60 to 4000 m)
	Airflow		280 cfm1 (approximately) through the system fan assembly module (low speed, normal
			operating temperatures, with clean air filter)
			450 cfm (approximately) through the system fan assembly module (high speed, chassis
			temperature at air outlet exceeds 40° C, with clean air filter)
	Operating vibrations		5 to 200 Hz, 1 g (1 octave/min), 200 to 500 Hz, 2 g (1 octave/min)
	Chassis power consumption		Not to exceed 2400 W2 (8189btu3)
				Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
	OL-18259-01				A-1