Cisco Systems Cisco uBR10012 manual Cisco uBR-MC5X20S/U Cable Interface Card

Chapter 1 Cisco uBR10012 Universal Broadband Router Overview

Cable Interface Line Cards

Cisco uBR10-LCP2-MC28C LEDs

The LCP adapter card and the cable interface line card each have their own set of status LEDs on the front of the module. The Cisco uBR10-LCP2 adapter card LEDs are described in Table 1-14. The Cisco uBR-MC28C cable interface line cards LEDs are described in Table 1-15.

Table 1-14describes the LCP2 adapter card LEDs and their functions.

Table 1-14	Cisco uBR10-LCP2 Adapter Card LEDs and Their Functions
LED	Status	Description
POWER	Green	Power is being supplied to the LCP2 adapter card
	Off	Power is off
STATUS	Yellow	The adapter card is in the bootup process, self-test, or downloading code.
	Green	The adapter card has successfully completed the boot, self-test, and code download process.
	Blinking green	Line card is in standby or protect mode.
MAINT	Off	Normally off, no maintenance action is required
	Yellow	It is safe to remove the entire assembly (adapter card and line card) from the chassis.
	The Cisco uBR-MC28C cable interface line card has its own set of LEDs. Table 1-15describes the LEDs
	and their functions:
Table 1-15	Cisco uBR-MC28C Line Card LEDs
LED	Status	Description
ENABLE	Green	The cable interface line card is operating normally, receiving DC power from the router
		midplane and configured for operation.
	Off	Either the card is shut down or the slot is not working.
Upstream	Green	For each upstream port, green indicates that the upstream path is enabled and configured.
	Off	The port is not properly configured, or is shut down, or the slot is not working.
Downstream	Green	For each downstream port, green indicates that the downstream path is enabled and
		configured.
	Off	The port is not properly configured, or is shut down, or the slot is not working.

Cisco uBR-MC5X20S/U Cable Interface Card

The Cisco uBR10-MC5X20S/U cable interface line card is a 20 by 16 inch card designed specifically for the Cisco uBR10012 router. This card transmits and receives RF signals between the subscriber and the headend over hybrid fiber/coax (HFC) system.

The Cisco uBR10-MC5X20S/U cable interface line card supports downstream and upstream traffic over

aData-Over-Cable Service Interface Specification (DOCSIS)-based cable modem network. The card supports 6-MHz National Television Systems Committee (NTSC) channel operation, using standard (STD), Harmonic Related Carrier (HRC), or Incremental Related Carrier (IRC) frequency plans conforming to EIA-S542. The card supports downstream channels in the 88 to 860 MHz range, and upstream channels in the 5 to 61 MHz range.

	Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
1-34	OL-18259-01