Cisco Systems Cisco uBR10012 manual Fiber-Optic Cables and Connectors

Appendix B Cable Specifications

Fiber-Optic Cables and Connectors

Figure B-8 Installing Cable in an RJ45 Connector

1

2 3

127878 4

1	Jacket cut here	3	RJ45 connector
2	Wire cut to one half inch in length	4	Cable installed in RJ45 connector

Fiber-Optic Cables and Connectors

The following warnings apply when you work with fiber-optic cables and ports.

Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051

Warning Laser radiation is present when the system is open and interlocks are bypassed. Statement 1009

Warning Class 1 laser product Statement 1008

Warning Class 1 LED product Statement 1027

Use a single-mode or multimode fiber-optic interface cable to connect your Cisco uBR10012 router to another router or switch.

In general, multimode cables are gray or orange, and single-mode cables are yellow.

Note Single-mode and multimode fiber-optic cables are not available from Cisco Systems, Inc.

Cisco uBR10012 Universal Broadband Router Hardware Installation Guide

B-8 OL-18259-01